Servicios Personalizados
Revista
Articulo
Español (pdf)
Articulo en XML
Referencias del artículo
Traducción automática
Enviar articulo por emailIndicadores
Citado por SciELO
Links relacionados
Similares en
SciELO
Compartir
Permalink
Revista Estomatológica Herediana
versión impresa ISSN 1019-4355
Resumen
SPOLJARIC MUNOZ, María Alejandra; PACHECO CAHUAS, María Daniela; CASTILLO ANDAMAYO, Esmeralda y QUINTANA DEL SOLAR, Martín Gilberto. Adaptation of Co-Cr copings made by induction casting and selective laser melting in CAD/CAM with clinical scanning. Rev. Estomatol. Herediana [online]. 2020, vol.30, n.3, pp.153-163. ISSN 1019-4355. http://dx.doi.org/10.20453/reh.v30i3.3818.
The technique of lost wax cast by induction centrifugation (CPCI) and selective laser fusion (SLM) in design and computer-aided manufacturing (CAD / CAM) with clinical scanning, are techniques for manufacturing cobalt-chromium copings (Co-Cr), have different production processes.
Objective:
To evaluate, in vitro, the marginal and internal adaptation of Co-Cr metal copings made on a chamfer termination line with the CPCI and SLM technique in CAD / CAM with clinical scanning.
Material and Methods:
A master model of Co-Cr premolar shape was made in CAD / CAM with chamfer termination line. With a clinical scanner, the master model was scanned and 13 Co-Cr copings manufactured in SLM were obtained. Impressions were taken to obtain models in type IV plaster where 13 Co-Cr copings with CPCI technique were manufactured. The marginal and internal adaptation was evaluated using the silicone replica technique, the samples were divided into segments: vestibulo-palatal and mesio-distal and were evaluated by stereo microscope.
Results:
The marginal and internal discrepancies were lower for the CPCI group compared to the SLM technique in CAD / CAM with clinical scanning. In addition, the results obtained for the marginal adaptation were less than 120 μm and the internal adaptation less than 350 μm for both techniques.
Conclusions:
The marginal and internal adaptation in the CPCI technique compared to SLM in CAD/CAM with clinical scan were better with statistically significant difference (p <0.05). In addition, the results obtained were within the clinically acceptable paramenters.
Palabras clave : Computer aided design; adaptation; solid state lasers; dental casting technique.
